1. Clear memory with a rub-pin pin memory with the purpose of cleaning cloth, may also give Tiner in a little more to clean from dust, and friction with the cloth will also provoke ion-ion on the pin memory tersimulasi that konduktornya become more active.
2. Navigate Avometer on the Ohm scale (scale to measure the barrier), may be in a position free of 1K, 10K, 100K ...
3. Take the needle negative (-) Avometer (black cable) and paste in one of the pins / memory foot, needle and positive (red cable) to the friction on the set of foot-leg IC / chipset memory, when memory has 8 pieces such as the IC friction needle (+) to the foot-IC is 8 feet.
4. Done .... please try to install memory on the Mainboard slotnya ....!
3. Take the needle negative (-) Avometer (black cable) and paste in one of the pins / memory foot, needle and positive (red cable) to the friction on the set of foot-leg IC / chipset memory, when memory has 8 pieces such as the IC friction needle (+) to the foot-IC is 8 feet.
4. Done .... please try to install memory on the Mainboard slotnya ....!